/*====================================================================*
*
* Copyright (c) 2013 Qualcomm Atheros, Inc.
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted (subject to the limitations
* in the disclaimer below) provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* * Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* * Neither the name of Qualcomm Atheros nor the names of
* its contributors may be used to endorse or promote products
* derived from this software without specific prior written
* permission.
*
* NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE
* GRANTED BY THIS LICENSE. THIS SOFTWARE IS PROVIDED BY THE
* COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
* OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
* OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*--------------------------------------------------------------------*/
/*====================================================================*
*
* signed EmulateHost (struct plc * plc);
*
* plc.h
*
* wait indefinitely for VS_HOST_ACTION messages; service requests
* only; it stops dead - like a bug! - on error;
*
*
* Contributor(s):
* Charles Maier <cmaier@qca.qualcomm.com>
*
*--------------------------------------------------------------------*/
#ifndef EMULATEHOST_SOURCE
#define EMULATEHOST_SOURCE
#include <unistd.h>
#include <memory.h>
#include "../plc/plc.h"
#include "../ether/channel.h"
#include "../tools/error.h"
#include "../tools/flags.h"
#include "../tools/files.h"
#include "../nvm/nvm.h"
#include "../pib/pib.h"
signed EmulateHost (struct plc * plc)
{
struct channel * channel = (struct channel *)(plc->channel);
struct message * message = (struct message *)(plc->message);
static char const * actions [] =
{
"start device",
"store firmware",
"store parameters",
"update host",
"config memory",
"restore defaults",
"unknown"
};
#ifndef __GNUC__
#pragma pack (push,1)
#endif
struct __packed vs_host_action_ind
{
struct ethernet_hdr ethernet;
struct qualcomm_hdr qualcomm;
uint8_t MACTION;
uint8_t MAJOR_VERSION;
uint8_t MINOR_VERSION;
}
* indicate = (struct vs_host_action_ind *) (message);
#if 0
struct __packed vs_host_action_rsp
{
struct ethernet_hdr ethernet;
struct qualcomm_hdr qualcomm;
uint8_t MSTATUS;
}
* response = (struct vs_host_action_rsp *) (message);
#endif
#ifndef __GNUC__
#pragma pack (pop)
#endif
struct nvm_header1 nvm_header;
struct pib_header pib_header;
uint32_t offset;
char const * PIB = plc->PIB.name;
char const * NVM = plc->NVM.name;
signed timer = channel->timeout;
signed status = 0;
Request (plc, "Waiting for Host Action");
while (1)
{
channel->timeout = plc->timer;
status = ReadMME (plc, 0, (VS_HOST_ACTION | MMTYPE_IND));
channel->timeout = timer;
if (status < 0)
{
break;
}
if (status > 0)
{
printf ("\n");
if (indicate->MACTION < (sizeof (actions) / sizeof (char const *)))
{
Confirm (plc, "Host Action Request is (%d) %s.", indicate->MACTION, actions [indicate->MACTION]);
}
else
{
error (0, ENOTSUP, "Host Action 0x%0X", indicate->MACTION);
continue;
}
memcpy (channel->peer, indicate->ethernet.OSA, sizeof (channel->peer));
channel->timeout = timer;
if (indicate->MACTION == 0x00)
{
unsigned module = 0;
char firmware [PLC_VERSION_STRING];
if (HostActionResponse (plc))
{
return (-1);
}
if (lseek (plc->PIB.file, 0, SEEK_SET))
{
error (1, errno, FILE_CANTHOME, plc->PIB.name);
}
if (read (plc->PIB.file, &pib_header, sizeof (pib_header)) != sizeof (pib_header))
{
error (1, errno, FILE_CANTREAD, plc->PIB.name);
}
if (lseek (plc->PIB.file, 0, SEEK_SET))
{
error (1, errno, FILE_CANTHOME, plc->PIB.name);
}
if (BE16TOH (*(uint16_t *)(&pib_header)) < 0x0305)
{
offset = LEGACY_PIBOFFSET;
}
else if (BE16TOH (*(uint16_t *)(&pib_header)) < 0x0500)
{
offset = INT6x00_PIBOFFSET;
}
else
{
offset = AR7x00_PIBOFFSET;
}
if (WriteMEM (plc, &plc->PIB, 0, offset, LE16TOH (pib_header.PIBLENGTH)))
{
return (-1);
}
if (lseek (plc->NVM.file, 0, SEEK_SET))
{
error (1, errno, FILE_CANTHOME, plc->NVM.name);
}
if (read (plc->NVM.file, &nvm_header, sizeof (nvm_header)) != sizeof (nvm_header))
{
error (1, errno, FILE_CANTREAD, plc->NVM.name);
}
while (nvm_header.NEXTHEADER)
{
lseek (plc->NVM.file, LE32TOH (nvm_header.NEXTHEADER), SEEK_SET);
if (read (plc->NVM.file, &nvm_header, sizeof (nvm_header)) != sizeof (nvm_header))
{
error (1, errno, FILE_CANTREAD, plc->NVM.name);
}
module++;
}
if (WriteFirmware1 (plc, module, &nvm_header))
{
return (-1);
}
if (StartFirmware1 (plc, module, &nvm_header))
{
return (-1);
}
if (WaitForStart (plc, firmware, sizeof (firmware)))
{
return (-1);
}
if (_anyset (plc->flags, PLC_FLASH_DEVICE))
{
if (WriteNVM (plc))
{
return (-1);
}
if (WritePIB (plc))
{
return (-1);
}
if (FlashNVM (plc))
{
return (-1);
}
}
continue;
}
if (indicate->MACTION == 0x01)
{
if (HostActionResponse (plc))
{
return (-1);
}
close (plc->NVM.file);
if (ReadFirmware1 (plc))
{
return (-1);
}
if ((plc->NVM.file = open (plc->NVM.name = plc->nvm.name, O_BINARY|O_RDONLY)) == -1)
{
error (1, errno, "%s", plc->NVM.name);
}
if (ResetDevice (plc))
{
return (-1);
}
continue;
}
if (indicate->MACTION == 0x02)
{
if (HostActionResponse (plc))
{
return (-1);
}
close (plc->PIB.file);
if (ReadParameters1 (plc))
{
return (-1);
}
if ((plc->PIB.file = open (plc->PIB.name = plc->pib.name, O_BINARY|O_RDONLY)) == -1)
{
error (1, errno, "%s", plc->PIB.name);
}
if (ResetDevice (plc))
{
return (-1);
}
continue;
}
if (indicate->MACTION == 0x03)
{
if (HostActionResponse (plc))
{
return (-1);
}
close (plc->NVM.file);
if (ReadFirmware1 (plc))
{
return (-1);
}
if ((plc->NVM.file = open (plc->NVM.name = plc->nvm.name, O_BINARY|O_RDONLY)) == -1)
{
error (1, errno, "%s", plc->NVM.name);
}
close (plc->PIB.file);
if (ReadParameters1 (plc))
{
return (-1);
}
if ((plc->PIB.file = open (plc->PIB.name = plc->pib.name, O_BINARY|O_RDONLY)) == -1)
{
error (1, errno, "%s", plc->PIB.name);
}
if (ResetDevice (plc))
{
return (-1);
}
continue;
}
if (indicate->MACTION == 0x04)
{
#if 0
/*
* Due to an omission in the INT6300 BootLoader, responding to this VS_HOST_ACTION
* indication will suppress subsequent VS_HOST_ACTION messages and the device will
* not request firmware and parameters; this may be corrected on the INT6400;
*/
if (HostActionResponse (plc))
{
return (-1);
}
#endif
if (WriteCFG (plc))
{
return (-1);
}
/*
* At this point, one could download firmware and parameters without waiting for
* further requests from the device; however, we elect to wait for them since it
* is 'good form'; a device should send code 0x00 within 10 seconds of this one;
*/
continue;
}
if (indicate->MACTION == 0x05)
{
if (HostActionResponse (plc))
{
return (-1);
}
close (plc->NVM.file);
if ((plc->NVM.file = open (plc->NVM.name = NVM, O_BINARY|O_RDONLY)) == -1)
{
error (1, errno, "%s", plc->NVM.name);
}
close (plc->PIB.file);
if ((plc->PIB.file = open (plc->PIB.name = PIB, O_BINARY|O_RDONLY)) == -1)
{
error (1, errno, "%s", plc->PIB.name);
}
if (ResetDevice (plc))
{
return (-1);
}
continue;
}
error (0, ENOSYS, "Host Action 0x%0X", indicate->MACTION);
}
}
return (0);
}
#endif